RIVA Yamaha Handlebar Extension Kit for RiDE
- Billet aluminum material
- Machined to precisely fit end of OEM handlebars
- Accommodates ODI 130mm Grips (sold separately)
- Includes stainless steel hardware
- Comes with installation instructions
- Sold as a set
RIVA Yamaha Pump Seal Kit, For RY22070
Dramatically reduce cavitation and prop spin with our easy to install Pump Seal Kits. Location specific, molded inserts fill the voids in pump inlet shoe that bleed air into pump causing cavitation. Recommended for craft using aftermarket intake grate. Includes detailed installation instructions.
Fits RIVA Top-Loader Intake Grate only (part# RY22070).
RIVA Yamaha Supercharger Shaft Upgrade Kit
Our Super-Duty GEN-4 SHO/SVHO Supercharger Shaft Kit provides the ultimate in reliability for high boost applications. Kit features a revolutionary hydraulic shaft stabilization bearing that limits shaft deflection and wear. Bearing stabilizes end of supercharger shaft via high pressure oil film dramatically increasing the stability of the system. Hydraulic end bearing and one-piece shaft bearing are fed by a through-shaft oiling system providing superior lubrication. Oil is delivered by braided stainless line and injected into a billet end cap that houses hydraulic bearing. Shaft is precision machined from a single piece of high-strength billet steel producing shaft, collar & gear as one piece. This eliminates the common failure point on stock shafts where OEM gear is pressed onto shaft. Shaft also features larger diameter threads & nut for added strength. Kit includes new one piece bearing with increased surface area providing improved torsional stability of shaft. Bearing features superior materials & finish treatment for reduced friction & abrasion resistance. This Shaft & Bearing Kit is a direct replacement for OEM parts and requires no additional modifications for use. Key Features Include:
- Hydraulic end bearing minimizes shaft deflection.
- Through-shaft oiling system maximizes lubrication.
- Braided stainless steel oil line delivers additional lubrication.
- One piece shaft/collar/gear construction. Stronger billet material & superior surface finish.
- Larger diameter threads & nut.
- One-piece bearing improves shaft stability.
- Bolt-on installation (no machining required).
- Manufactured exclusively for RIVA Racing by HKS.
RIVA Yamaha SVHO 'R3' Supercharger Impeller
Our new generation 'R3' supercharger impeller for the Yamaha SVHO Engine delivers incredible horsepower and torque throughout the RPM range. All new blade design produces increased boost pressure and air flow resulting in excellent acceleration and top speed. Precision machined from billet aluminum to exact tolerances and anodized to prevent corrosion. Installs quickly and easily into stock supercharger housing. Includes detailed installation instructions. Key Features:
- More acceleration & top speed
- Constructed with 2618 U.S. Forged Aluminum
- Precision machining does not require "old school" post production balancing
- Anodized to prevent corrosion
- Made in North America
- 8 PSI @ 6,000 RPM
- 11 PSI @ 7,000 RPM
- 15.5 PSI @ 8,000 RPM
- 17.5 PSI @ 8,500 RPM
- 20 PSI @ 9,000 RPM
- 22 PSI @ 9,500 RPM
RIVA Yamaha SVHO 'R4' Supercharger Impeller
- More acceleration & top speed
- Constructed with 2618 U.S. Forged Aluminum
- Precision machining does not require "old school" post production balancing
- Anodized to prevent corrosion
- Made in North America
- 8.5 PSI @ 6,000 RPM
- 11.75 PSI @ 7,000 RPM
- 16 PSI @ 8,000 RPM
- 19.5 PSI @ 8,500 RPM
- 22 PSI @ 9,000 RPM
- 25 PSI @ 9,500 RPM
RIVA Yamaha SVHO & 2011+ SHO 3-Bar MAP Sensor Kit
Our 3-Bar MAP Sensor Kit is essential for accurate engine management with boost applications over 14.7psi. High quality 3-Bar MAP Sensor will measure up to 29.7psi, where the OEM 2-Bar MAP Sensor will only measure up to 14.7psi. It is critical to provide accurate pressure information to your ECU to ensure proper air/fuel mixture and data logging. RIVA 3-Bar MAP Sensors mount directly in place of OEM sensor with a stainless bracket and plug directly into OEM wiring harness. Fits all SVHO and 2011 & Newer SHO engines. NOTE: ECU must be calibrated to work with 3-Bar MAP Sensor.
RIVA Yamaha SVHO/SHO HKS Blow-off Valve Kit
Our RIVA Yamaha SVHO/SHO HKS Blow-off Valve Kit improves supercharger reliability and performance by relieving unwanted pressure during off-throttle operation. Reduces supercharger clutch & gear wear and eliminates heat soak in discharge tube. High-strength silicone hose with integrated HKS valve installs easily in place of OEM elbow joint. Includes high-quality HKS Super SQV (Super Sequential Blow-off Valve) that features unique sequential valve structure and a differential pressure control system, allowing for a broad operation boost range. Also includes vacuum line and fittings necessary for installation on Yamaha SVHO & SHO engines. A simple and cost effective upgrade for both stock and modified engines running the original intercooler. Key Features:
- Genuine HKS Super SQV Blow-off Valve
- Improves supercharger reliability and performance
- Reduces supercharger clutch & gear wear
- Eliminates heat soak in discharge tube
- Includes vacuum line and fittings necessary for installation on Yamaha SVHO & SHO engines
RIVA Yamaha/Kawasaki Valve Spring Compression Tool
Our overhead Valve Spring Compression Tool allows easy removal of valve springs and keepers without removing cylinder head. Includes compression adapter to pressurize cylinder keeping valves in place during removal of stock springs and keepers. Fits both Yamaha 1.8L & Kawasaki 1.5L 4-stroke engines. Key Features:
- Keeps valves in place during removal of stock springs and keepers
- Allows easy removal without removing cylinder head
- Includes compression adapter
- Fits both Yamaha 1.8L & Kawasaki 1.5L 4-stroke engines.
RIVA/Darton Yamaha SHO/SVHO 1.8L Pro-Series Cylinder Sleeves
Our new bulletproof sleeve system is the ultimate foundation for your high performance engine. Engineered specifically for Yamaha SHO & SVHO engines by Darton Sleeves, the leader in racing sleeve technology, these sleeves will hold up to extreme punishment in high boost applications. Innovative Flat-Lock flange design locks sleeves in place reinforcing block and protecting head gasket. Key Features Include:
- Integrated Flat-Lock flange design protects block.
- Bulletproof Darton ductile steel construction.
- Increased horsepower potential.
- Ideal for high boost supercharged & turbo applications.
- Superior ring sealing.
- Can be installed by your local machine shop.
- Sold as a set of 4 matching sleeves.
- Engineered specifically for the Yamaha SHO & SVHO engine by Darton Sleeves.
RIVA/Solas Stainless Steel Pump, Yamaha SVHO/6ET, 160mm/12-Vane
RIVA's Stainless Steel Race Pump delivers increased acceleration & top speed along with reduced cavitation. Designed for high performance applications that exceed the limits of original pump efficiency. Features computer designed 160mm/12-vane stator section constructed of high-grade stainless steel for superior strength and corrosion resistance. Dramatically improves efficiency and performance for 2019 & older models that come equipped with 155mm pumps. Utilizes OEM bearings, seals and driveshaft. NOTE: This product will not fit 2020 & newer FX & GP SVHO models directly without the use of RIVA Yamaha 160mm Stainless Steel Wear Ring (Part# RY33-160-YV) and additional hardware (see below). See 'Applications' chart below for list of applicable models.
Rockford Fosgate M0 6.5" Marine Grade Speakers (pr)
Rockford Fosgate M1 10" DVC Marine Subwoofer
Rockford Fosgate M1 12" DVC Marine Subwoofer
Rockford Fosgate M1 6.5” Color Optix™ Marine 2-Way Speakers (pr)
Rockford Fosgate M1 6” Color Optix™ Marine 2-Way Speakers (pr)
Rockford Fosgate M1 8" DVC Marine Subwoofer
Rockford Fosgate M1 8” Color Optix™ Marine 2-Way Speakers (pr)
Rockford Fosgate M2 10" Color Optix™ 2-Way Horn Loaded Speaker (pr)
Rockford Fosgate M2 10" Color Optix™ 2-Way Horn Loaded Tower Marine Speakers (pr)
Rockford Fosgate M2 10" DVC Infinite Baffle Marine Subwoofer
Rockford Fosgate M2 10" DVC Infinite Baffle Marine Subwoofer: Black Gen-2
Rockford Fosgate M2 10" DVC Sealed Marine Subwoofer
Rockford Fosgate M2 10" DVC Sealed Marine Subwoofer: Black Gen-2
Rockford Fosgate M2 12" DVC Infinite Baffle Marine Subwoofer
Rockford Fosgate M2 12" DVC Sealed Enclosure Marine Subwoofer
Rockford Fosgate M2 6.5” Color Optix™ Marine 2-Way Speakers (pr)
Rockford Fosgate M2 8” Color Optix™ 2-Way Horn Loaded Wake Tower Speakers (pr)
Rockford Fosgate M2 8” Color Optix™ 2-Way Wake Tower Speakers (pr)
Rockford Fosgate M2 8” Color Optix™ Marine 2-Way Horn Speakers (pr)
Rockford Fosgate M2 8” Color Optix™ Marine 2-Way Speakers (pr)
Rotax Catalyst Delete Kit
This kit allows you to delete the Catalyst from any vessel with a Rotax engine. With this kit, you can eliminate the catalyst and relocate the O2 Sensors. This kit is pretty much Plug and Play. **NO MODIFICATION TO ECU OR WIRING HARNESS** There are only 2 things that you will need to "figure out" is connecting the exhaust hose from waterbox to resonator / exhaust outlet, depending on how it is setup on your boat. The 2nd is re-arranging the cooling lines. We can give you a diagram on how it needs to be done, but you may need to purchase some hose depending on the exisiting layout of your boat. PLEASE NOTE, THAT YOU NEED ONE KIT PER ENGINE. with a Twin Engine Boat, you need to order 2 kits. This system works on any Rotax powered Scarab, Chaparral Vortex, Seadoo Switch, Williams Tender, ABJet Tender...etc ..etc... All of these products, minus our custom designed ones, are OEM BRP Rotax Components. Deliveries average about 7-10 days from the moment the order is placed. The Kit includes the following parts: MotoMarine Race Plate O2 Sensor Exhaust Clamp Head Pipe Ass'y Gear Clamp Hose Muffler Waterbox Temperature Sensor Gear Clamp Front Formed Exhaust Hose Extension Plug Non Fouler Adapter Hose, Bypass Upper T-Fitting Hose, Bypass Lower Formed Hose Oetiker Clamp Oetiker Clamp Oetiker Clamp Alum Tube
Sea-Doo 300 OEM Complete Supercharger
Complete Sea-Doo 300 Supercharger Assembly - part number 420893588 (also replaces 420893567 and 420893566) and fits all 2016-2025 Sea-Doo 300 models. Bolt-in and go! This is a genuine Sea-Doo factory replacement part, supplied directly from BRP Sea-Doo. If you need a performance supercharger, check out the Fizzle Z135, Z142-S, Z142 supercharger assemblies.
Sea-Doo Jet Pump Rebuild (Mail In Service)
Mail in service. Ship us your JetPump, we will inspect it, rebuild it and ship it back to you. This service includes all of the bearings, seals, gaskets. If your Jetpump has any damage to the housing or Shaft, we will contact you prior to working on it. Mail to: MotoMarine Attn: Jetpump Rebuild (Order#) 505 S Cypress Rd Pompano Beach FL 33060
Sea-Doo Wire Harness Extension Cable
SeaBob F5 Battery Repair
This is a mail-in or drop off service at our location. PLEASE CONTACT US FOR A QUOTE & TO SCHEDULE YOUR REPAIR
SeaBob F5 Circuit Board Repair
This is a mail-in or drop off service at our location. PLEASE CONTACT US FOR A QUOTE & TO SCHEDULE YOUR REPAIR
SeaBob F5S Battery Repair
This is a mail-in or drop off service at our location. PLEASE CONTACT US FOR A QUOTE & TO SCHEDULE YOUR REPAIR
SeaBob F5S Circuit Board Repair
This is a mail-in or drop off service at our location. PLEASE CONTACT US FOR A QUOTE & TO SCHEDULE YOUR REPAIR
SeaBob F5SR Battery Repair
This is a mail-in or drop off service at our location. PLEASE CONTACT US FOR A QUOTE & TO SCHEDULE YOUR REPAIR
SeaBob F5SR Circuit Board Repair
This is a mail-in or drop off service at our location. PLEASE CONTACT US FOR A QUOTE & TO SCHEDULE YOUR REPAIR
SeaBob F7 Battery Repair
This is a mail-in or drop off service at our location. PLEASE CONTACT US FOR A QUOTE & TO SCHEDULE YOUR REPAIR
SeaBob F7 Circuit Board Repair
This is a mail-in or drop off service at our location. PLEASE CONTACT US FOR A QUOTE & TO SCHEDULE YOUR REPAIR
Seabob Refurbishment
This is a mail-in or drop off service at our location. PLEASE CONTACT US FOR A QUOTE & TO SCHEDULE YOUR REPAIR
Seabob Winterization
This is a mail-in or drop off service at our location. PLEASE CONTACT US FOR A QUOTE & TO SCHEDULE YOUR REPAIR
Seadoo 130 / 155 / 215 / 260 Long Block
Seadoo 130 / 155 / 215 / 260 Long Block Please note there is a $500 core charge. This charge is refundable as long as we receive a useable core in return. When ordering, you will pay for the core charge, and we will ship your engine. Once you've received it, and ship us the old engine back, we will refund your core charge after inspecting your engine. You can reuse the pallet and straps, then the easiest way is to schedule a shipment with UShip.com
Seadoo 170/ 230 Long Block
Seadoo 170/ 230 Long Block Please note there is a $500 core charge. This charge is refundable as long as we receive a useable core in return. When ordering, you will pay for the core charge, and we will ship your engine. Once you've received it, and ship us the old engine back, we will refund your core charge after inspecting your engine. You can reuse the pallet and straps, then the easiest way is to schedule a shipment with UShip.com
Seadoo 300 Long Block
Seadoo 300 Long Block Please note there is a $500 core charge. This charge is refundable as long as we receive a useable core in return. When ordering, you will pay for the core charge, and we will ship your engine. Once you've received it, and ship us the old engine back, we will refund your core charge after inspecting your engine. You can reuse the pallet and straps, then the easiest way is to schedule a shipment with UShip.com
Seadoo 325 Long Block
Seadoo 325 Long Block Please note there is a $500 core charge. This charge is refundable as long as we receive a useable core in return. When ordering, you will pay for the core charge, and we will ship your engine. Once you've received it, and ship us the old engine back, we will refund your core charge after inspecting your engine. You can reuse the pallet and straps, then the easiest way is to schedule a shipment with UShip.com
