Intake Manifold Brace Girdle Sea-Doo 300/260/255/230/215
This Intake manifold brace girdle provides heavy duty reinforcement to the intake manifold by giving it added strength that allows it to hold up to higher boost pressures and prevent the intake manifold from splitting at the seam. This part does not require any drilling or cutting of the intake manifold. This brace fits all supercharged Sea-Doo watercraft and we consider it a must-have item for any Sea-Doo 300/260/255/230/215 and a great precautionary measure for any modified Sea-Doo pushing more than 13 PSI of boost.
InterState 24M-XHD Starting Battery
Group Size 24M 800 Cold Cranking Amps (CCA) Group 24M battery 12 Month Warranty 800 Cold Cranking Amps (CCA) 135 Reserve Capacity (RC)@25 Amps 12 Month Warranty Free Replacement Warranty Fits Vehicle Option: 11 " (L) X 6 7/8" (W) X 9 " (H)
InterState SRM-24 Deep Cycle Battery
Group Size 24M 550 Cold Cranking Amps (CCA) Group 24M battery 12 Month Warranty 550 Cold Cranking Amps (CCA) 140 Reserve Capacity (RC)@25 Amps 12 Month Warranty Free Replacement Warranty Fits Vehicle Option: 11 " (L) X 6 7/8" (W) X 9 " (H)
InterState SRM-31 Deep Cycle Battery
- Group 31M battery
- 12 Month Warranty
- 675 Cold Cranking Amps (CCA)
- 210 Reserve Capacity (RC)@25 Amps
12 Month Warranty
Free Replacement WarrantyFits Vehicle Option:
- 13 " (L) X 6 3/4" (W) X 9 5/8" (H)
JL Audio MX 280/4 AMP & Plug n Play Harness
JL Audio® AP Amplifiers
JL Audio® M3 10" Marine Subwoofer
JL Audio® M3 6.5" Enclosed Tower Speakers
JL Audio® M3 6.5" Enclosed Tower Speakers RGB LED
JL Audio® M3 6.5" Marine Speakers
JL Audio® M3 6.5" Marine Speakers RGB LED
JL Audio® M3 6.5" VeX™ Enclosed System
JL Audio® M3 6.5" VeX™ Enclosed System RGB LED
JL Audio® M6 10" Marine Subwoofer
JL Audio® M6 6.5" Marine Speakers
JL Audio® M6 6.5" Marine Speakers RGB LED
JL Audio® M6 6.5" VeX™ Enclosed System
JL Audio® M6 7.7" Enclosed Tower Speakers
JL Audio® M6 7.7" Enclosed Tower Speakers RGB LED
JL Audio® M6 7.7" Marine Speakers
JL Audio® M6 7.7" Marine Speakers RGB LED
JL Audio® M6 8.8" Enclosed Tower Speakers
JL Audio® M6 8.8" Enclosed Tower Speakers RGB LED
JL Audio® M6 8.8" Marine Speakers
JL Audio® M6 8.8" Marine Speakers RGB LED
JL Audio® M6 8" Marine Subwoofer
JL Audio® M6 Marine Component Tweeter
JL Audio® M7 12" Marine Subwoofer
JL Audio® MHD Marine Amplifier
JL Audio® MVi Marine Amplifier
JL Audio® MX Marine and Powersports Amplifiers
JL Audio® Receiver MBT-CRXv3
JL Audio® Receiver
Weatherproof Controller/Receiver with Bluetooth® Technology (MBT-CRXv3)
JL Audio® Receiver MMBT-RXv2
JL Audio® Receiver
Weatherproof Receiver with Bluetooth® Technology (MBT-RXv2)
JL Audio® XDM Car and Marine Amplifier
Kawasaki Key Tool
Kawasaki Key tool is used to program new security/immobilizer keys (SLO or FAST) to Kawasaki Ultra Jet Skis equipped with the security/immobilizer system. Kawasaki Key tool is used to program new security/immobilizer keys (SLO or FAST) to Kawasaki Ultra Jet Skis equipped with the security/immobilizer system. It comes equipped with connectors that attach to both early (2007-2009) and Late model (2010+) Ultra’s. (NOTE: On the Kawasaki system, you must have at least one currently programmed key to add new keys! NOTE: If you have lost all keys, this tool will not program new keys, you must purchase a new ECU)
Kelford Cams 272/276 | Stage 1 900 ACE Sea-Doo Spark Jetski
272°/276° | 9.30mm/9.30mm Stage 1 cam upgrade for mildly modified engines. Cam timing is specifically designed for Jet Ski applications. Still maintains good throttle response. Great mid-high rpm power gains. To suit OEM hydraulic lifter. 9500rpm with our matching valve spring kit KVS236-BT.
Kelford Cams 276/282 | Stage 1 1503-1630 Rotax 4TEC
276°/282° | 116° Lobe Separation | 10.30mm/10.30mm Sea-Doo Jet Ski Racing Camshaft: Stage 1 high performance cam upgrade for a stock engine. Great power gains all the way to the stock rev limiter. This camshaft is designed to be used with stock valve springs or our RET03-STD replacement Titanium Retainer.
Kelford Cams 282/286 | Stage 2 900 ACE Sea-Doo Spark Jetski
282°/286° | 9.80mm/9.80mm Stage 2 racing cams for heavily modified engines. Cam timing is specifically designed for Jet Ski applications. Great high rpm power gains. To suit OEM hydraulic lifter. 9500rpm with our matching valve spring kit KVS236-BT.
Kelford Cams 282/292 | Stage 2 1503-1630 Rotax 4TEC
282°/292° | 118° Lobe Separation | 10.80mm/10.50mm Seadoo Jet Ski 1503 1630 Rotax 4-TEC: Stage 2 racing camshaft to suit engines with supercharger upgrades. Suits up to 25psi boost and 9500RPM with our matching KVS03 valve spring kit.
Kelford Cams 286/294 | Turbo 1503 1630 Rotax 4-TEC
286°/294° | 118° Lobe Separation | 11.00mm/10.75mm SeaDoo Jet Ski 1503 1630 Rotax 4-Tec Camshaft: Turbo Cam designed for engines making 300hp+. Turbo sizing 48-54mm. Suited to high boost and high RPM. Requires Spring and Titanium retainer kit to support 10,000RPM
License Engineering for Polaris DigitalWrench II
ENGINEERING License for POLARIS DIGITAL WRENCH II
LN0001 – SGC Lug Nuts – STANDARD (1/2″-20) – Color Chrome
SGC Lug Nuts – STANDARD (1/2″-20) – Color Chrome
M-JET Flasher for Sea-Doo
M-JET O2 Sensor Module
M-JET temperature module
Maptuner BRP Diagnostic Port Expansion Harness
Maptuner BRP Diagnostic Port Expansion Harness enables you to connect multiple accessories to your Sea-Doo's diagnostic port simultaneously. You can connect a Maptuner Nano to one side of the cable and a Sea-Doo Depth Finder to the other without interfering with their operation. Additionally, multiple BRP accessory modules may be connected together as well.
Maptuner HDMI Logging Cable
The Maptuner HDMI Logging Cable enables Maptuner X (01-MTX) and Maptuner Nano (HDMI) (01-NX3A) Tuning Devices to communicate directly with the Bosch LSU 4.9 Wideband Sensor (88-308) when used in conjunction with the Maptuner Lambda to CAN Module Cable (001-101), eliminating the need for additional communication devices like the PLX Wideband Air/Fuel Sensor Module. Included in Maptuner Nano Data Logging Kits RY21HDMI-LOG-KIT and RS21BRP-LOG-KIT.
Maptuner Kawasaki Diagnostic Cable
Maptuner Diagnostic Cable connects Maptuner devices to your Jet Ski in order to collect diagnostic information.
Maptuner Lambda to CAN Module
This Maptuner cable (001-101) makes it possible to connect Maptuner Tuning Devices directly to the Bosch LSU 4.9 Wideband Sensor (88-308), eliminating the need for additional communication devices like the PLX Wideband Air/Fuel Sensor Module. Works with Maptuner (HDMI) Logging Cable 01-MT061 and Maptuner Nano (BRP) Logging Cable 01-MT062. Both sold separately. Included in Maptuner Nano Data Logging Kits RY21HDMI-LOG-KIT and RS21BRP-LOG-KIT.
Maptuner Nano BRP Logging Cable
The Maptuner Nano (BRP) Logging Cable enables the Maptuner Nano (BRP) Tuning Device (01-NB3A) to communicate directly with the Bosch LSU 4.9 Wideband Sensor (88-308) when used in conjunction with the Maptuner Lambda to CAN Module Cable (001-101), eliminating the need for additional communication devices like the PLX Wideband Air/Fuel Sensor Module. Note: For use on 2017 & newer models only. Requires Lambda to CAN Module Cabble (001-101). Included in Maptuner Nano Data Logging Kits RY21HDMI-LOG-KIT and RS21BRP-LOG-KIT.
Maptuner Replacement USB Cable, Maptuner Device to PC
This Maptuner USB cable (01-MT015) connects Maptuner devices to any PC for the upload and download of files. Easily update, upload, and download from the Maptuner device to your PC.
Maptuner Yamaha Diagnostic Cable
The Maptuner Diagnostic Cable connects Maptuner devices to Yamaha Jet Boats in order to collect diagnostic information.
MEGATECH / MECHATRONIC BUDS / BUDS2 License
MEGATECH & MECHATRONIC EXPERT BRP BUDS / BUDS2 License BUDS / BUDS2 ( BRP Utility and Diagnostic Software) is a comprehensive multi-language diagnostic software that gives you an insight on BRP electronic modules.
MotoMarine Replacement Lanyard
REPLACEMENT FLOATING LANYARD MotoMarine has created this product as a direct replacement for any make and model’s lanyard. This product is ideal for any and all OEM lanyards that have lost their rubberized coating exposing the inner string which removes the convenient coil effect of their original state. This problem is most common with OEM DESS and all normal lanyards. This product can easily be used by utilizing the convenient stainless clip to attach the desired lanyard key to and have a like new floating lanyard in seconds. The replacement lanyard has a stainless clip to secure any desired lanyard piece, an attached floatation tube, and plastic vest clip.
MotoMarine Sea-Doo Exhaust Race Plate
The CNC machined T6 billet aluminum spacer installs seamlessly between exhaust manifold and cylinder head. This is a standalone Exhaust Race Plate but also designed specifically as part of our Rotax Catalyst Delete Kit, with DUAL Bosch O2 Sensor ports, as well as includes threaded ports for easy installation for EGT sensor in each exhaust port, eliminating the need for modifications to cast aluminum OEM exhaust manifold. Block-off fittings are supplied for use when sensors are not installed. Anodized to prevent corrosion and includes stainless steel hardware. Key Features: DUAL Bosch O2 Sensor Ports Integrated EGT Sensor Ports Increases Engine RPM & Top Speed CNC machined from T6 Billet Aluminum Plug-n-Play Design Requires No Modifications to OEM Exhaust Manifold Designed for Supercharged 1503 & 1630 engines.
MotoMarine Seadoo Camshaft 8500+ RPM
Our stage 3 and biggest camshaft for the supercharged Sea-Doo. Rough idle and top end power. Tuning required. Aftermarket valve springs and higher boost than stock is suggested. We will ship you a reground cam, and receive your core.
MotoMarine UTX16-BS Battery
C.C.A: 230A Voltage: 12 V Amperage: 1.1 A Joiner: D type Maximum dimensions: 5,895x 3,419 x 6,324 inch
MotoMarine UTX20CH-BS Battery
UTX20CH-BS Battery (AGM) C.C.A: 270A Voltage: 12 V Capacity: 18 Ah Amperage: 1.8 A Joiner: D type ( + - ) Maximum dimensions: 5,895 x 3,419 x 6,327 inch
NMEA Engine Gateway for BRP Engines
Gateway for Volvo Penta, BRP Rotax, SmartCraft (Mercury, Mercruiser) and J1939 engines to NMEA 2000 marine electronics networks. It will provides you with engine revolutions, motor hours, coolant temperature, battery voltage, warning and alarms, fuel rate and other data on the screen of your chart plotter.
Noco Genius5 Charger
MEET THE GENIUS5 — Similar to our G3500, just better. It's 34% smaller and delivers over 65% more power. It's the all-in-one charging solution - battery charger, battery maintainer, trickle charger, plus desulfator. DO MORE WITH GENIUS — Designed for 6-volt and 12-volt lead-acid (AGM, Gel, SLA, VRLA) and lithium-ion (LiFePO4) batteries, including flooded, maintenance-free, deep-cycle, marine and powersport batteries. ENJOY PRECISION CHARGING — An integrated thermal sensor dynamically adjusts the charge based on ambient temperature, preventing overcharging in hot weather and undercharging in cold, ensuring optimal battery performance. CHARGE DEAD BATTERIES — Charge batteries from as low as 1 volt, or use Force Mode to manually charge completely dead batteries down to zero volts. Perfect for recovering deeply discharged or neglected batteries. BEYOND MAINTENANCE — Keep your battery fully charged without worrying about overcharging. Our smart charger constantly monitors the battery, allowing you to leave it connected safely - indefinitely - for worry-free maintenance. RESTORE YOUR BATTERY — Precision pulse charging automatically detects and reverses battery sulfation and acid stratification, restoring your battery's health for improved performance and extended lifespan. COMPATIBLE — Charges and maintains all types of vehicles, including cars, automobiles, motorcycles, mopeds, lawn mowers, ATVs, UTVs, tractors, trucks, SUVs, RVs, campers, trailers, boats, PWCs, jet skis, classic cars, and more. WHAT'S IN THE BOX — Includes a 5A charger, 72-inch AC cable, 80-inch DC cable with battery clamps, and integrated eyelet terminals, mounting bracket, screws, and a 3-year warranty. Proudly designed in the USA.
Odyssey PC680 for Williams Tenders
Replacement Battery for Williams Tender XR-600 Xtreme XR600 Xtreme Racing Series XR-600 AGM Battery 26Ah 600A Absorbed Glass Mat (AGM) batteries are dry-cell, with the battery acid being encapsulated in fibreglass sheets. In comparison to flooded batteries, AGMs offer increased levels of reliability and versatility – with no free acid, they can be mounted in any orientation and are better able to handle vibration. Voltage 12v Ah 22Ah (C20) Watts / 15Min (LCP) 88w CCA 680A PHCA 5 Sec Weight 9.0kg Length 182mm Width 77mm Height 168mm Terminal Type A
POLARIS MultiLink Add-on Cable - Indian/Victory OBD2
POLARIS MultiLink Add-on Cable Adapter for Older Models POLARIS MultiLink Add-on Cable adapter for connecting to older models.
POLARIS MultiLink Add-on Cable for Older Models
POLARIS MultiLink Add-on Cable Adapter for Older Models POLARIS MultiLink Add-on Cable adapter for connecting to older models.
Polaris MultiLink diagnostic kit
This genuine POLARIS MultiLink Diagnostic Kit for all POLARIS ATV/SSV/SNOWMOBILES & INDIAN/VICTORY MOTORCYCLES
POLARIS POWER INTERFACE ADAPTER
POLARIS POWER INTERFACE Adapter for older vehicles.
PWC Bilge Kit 900gph
Keep your jet ski's hull dry and perform at its best with MotoMarine's premium selection of bilge pumps and hull components. We like to use a Rule Low Profile bilge pump. We include a Water Outlet, which we have the option of Black, Blue, Red, Green, Orange and Purple. 1 x Rule 900gph Bilge Pump 1 x 4 ft Hose 1 x Billet Aluminum Water Outlet 2 x Stainless Steel Hose Clamps 1 x 4 ft Marine Grade Wire 2 x Terminal Connections 2 x Butt Connectors 2 x Heat Shrink
Ribbon Delete Kit (IMUK) for Sea-Doo 325/300/230
|
Let your engine breathe better! This kit allows you to easily remove the restrictive filter element from inside the intake manifold. Removing the restriction increases horsepower and allows for gains of ~1 PSI of boost pressure. Included is a cutting guide for the required 3-1/8” (79mm) hole saw that’s needed to remove the filter element (hole saw sold separately). The void left by the filter element is filled with the provided precision machined billet aluminum block-off plug with o-ring seals and also includes a 2-piece billet aluminum clamp to secure the block-off plug in place. The block-off plug also features a 1/8” NPT threaded port that allows you to connect a vacuum line to work with a wide array of accessories such as blow off valves, boost gauges, or rising rate fuel pressure regulators. All the aluminum components are anodized for increased corrosion protection.
Fits all Sea-Doo 325, 300, and 230 HP watercraft
|
RIVA 'PRO-BAR' 30" Runabout Handlebars - Black
RIVA 'PRO-BAR' 30" Runabout Handlebars are constructed from a proprietary aluminum alloy that offers maximum strength with reduced vibration. High-tech finish and premium features make this the ultimate watercraft handlebar! Key Features:
- Made from 7/8", proprietary, T6 aluminum alloy for superior tensile strength & vibration dampening
- Accepts RiDE controls with 130mm grips.
- Cross bar clamps CNC machined from 6061 aluminum and mounted with stainless hardware & threadlock
- Cross bar made from cold forged aluminum
- Includes high density foam pad & cover
- High tech, shot peened and anodized finish for unmatched durability
- Knurled ends offer better grip adhesion (accepts popular ODI grips)
- Clamp area lines to indicate bar position
RIVA 'PRO-BAR' 32" Aluminum Runabout Handlebars
RIVA 'PRO-BAR' 32" Runabout Handlebars are constructed from a proprietary aluminum alloy that offers maximum strength with reduced vibration. High tech finish and premium features make this the ultimate watercraft bar! Key Features:
- Made from 7/8", proprietary, T6 aluminum alloy for superior tensile strength & vibration dampening
- Cross-bar clamps CNC machined from 6061 aluminum and mounted with stainless hardware & threadlock
- Cross-bar made from cold forged aluminum
- Includes high-density foam pad & cover
- High-tech, shot peened and anodized finish for unmatched durability
- Knurled ends offer better grip adhesion (accepts popular ODI grips)
- Clamp area lines to indicate bar position
- Available in Black
RIVA Cylinder Head Stud Kit Yamaha 1.8L Engines
Our ultra high-strength RIVA Cylinder Head Stud Kit is essential equipment when upgrading internal components on your high boost Yamaha engine. Precision machined from premium grade 8740 alloy and heat treated to exacting tolerances, these studs dramatically increase reliability & ease of maintenance. Superior material & heat treat process provide 10X better fatigue strength than OEM bolts. Studs provide improved alignment of cylinder head and gasket for increased reliability and ease of maintenance. More accurate & consistent torque loading provides a more uniform clamping force on head gasket. Helps prevent blown head gaskets and assures optimum engine sealing.
RIVA High Volume Fuel Pump Only
Direct replacement for fuel pump supplied in RIVA High Volume Fuel Pump Kits. NOTE: Additional components required for proper installation not sold separately.