Yamaha YDS YDIS SMART Bluetooth Mobile diagnostic kit
Air Box Mini Electric Pump
The technology evolution for kites, wings, and boards has rapidly improved to enhance your experience on the water. However, perhaps the most critical component required to get on the water -the pump- has remained unchanged since the days of flip phones. Not anymore. Gone are the times of struggling with manual pumping, thanks to the Air Box: Ride Engine's rechargeable electric pump. Engineered alongside a top electric pump manufacturer, the Air Box has a powerful two-stage system that automatically switches from low-pressure, high-volume pumping to high-pressure, low-volume delivering the fastest inflation possible. Eliminate the worry of over or under inflating your gear when you set your desired air pressure on the Air Box. The smart inflation technology has real-time pressure monitoring, ensuring an automatic shut-off once the pump reaches the selected pressure. Powered by a lithium-ion battery cell, it can inflate four to six kites or wings, and three SUPs on a single charge.
- Size 139mm X 125mm X 69mm
- Battery 4500mAh 14.8V
- Max PSI 20psi
- Types of Motors Brushless DC
- High Volume Motor Max PSI 1.8psi
BRP DESS Interface 4-Tec / E-Tec
BRP 4-TEC Desspost unit
- Designed for add/erase DESS keys for 4-TEC models of SeaDoo and Skidoo vehicles.
- Works only in conjunction with the MPI-2 and MPI-3 Interfaces
- This device is connected between the MPI Interface and the diagnostic cable and is used only for procedures with DESS keys.
ECU-RUNNER - FOR BRP ECU
Enables to connect "on the bench" the BRP MPI interface to BRP ECM without delivering the vehicle to the workshop.
Fizzle Sea-Doo 300 Supercharger Shaft Holding Wrench
M-JET Flasher Additional License
DUE TO OVERWHELMING ORDERS, SHIPPING DELAYED BY ABOUT 2 WEEKS
Rockford Fosgate 4-Pin Color Optix™ Y-Adaptor for PMX-RGB (Gen-2)
Plug-and-play Y-adaptor simplifies the installation of additional Color Optix™ speakers. Simply connect this Y-adaptor to the RGB controller or RGB-6/16/25 extension cable, plug-in the speaker's Deutsch™ connector, then use the additional 4-pin female connector to daisy-chain an additional speaker. Check compatibility chart of Rockford Fosgate marine audio speakers before purchasing.
Rockford Fosgate 6-Pin Color Optix™ Y-Adaptor for PMX-RGB (Gen-2)
Plug-and-play Y-adaptor simplifies the installation of daisy-chaining Color Optix™ moto-can or wake-can speakers. Simply connect this Y-adaptor to the RGB controller or RGB-6/16/25 extension cable, plug-in the speaker's Deutsch™ connector, then use the additional 4-pin female connector to daisy-chain an additional speaker. The remaining red/black wire can be used to wire the speaker to the amplifier's output terminals. Check compatibility chart of Rockford Fosgate marine audio speakers before purchasing.
Seadoo PRV 6.5" Audio Upgrade Kit w/ 10 inch Subwoofer
This is our favorite and best selling audio package for Seadoo. 1 x MotoMarine's Seadoo Plug and Play Audio Harness 1 x JL MX 280/4 Amp 1 x JL MX 500/1 Amp 2 x PRV MT6MR400CF-NDY-4 SLIM Midrange 2 x PRV MT2.7TWB-4 Tweeter 6 x RCA Y-Adaptor 6 ft RCA Cables 6 ft Remote Wire Power Cables Amp 10 inch Subwoofer Sealed Box This complete plug and play package for Seadoo, connects right up without the need to cut any wiring. Simply remove the factory speakers and factory amp. The JL MX280/4 Amp fits directly inside the speaker pod, and with our included speaker adapters, you can connect everything thru the factory wire harness. Installs in minutes. With our configuration, you will setup the AMP Bridged @ 4Ω 140 W RMS x 2. The Subwoofer installs inside the hull, and the JL Audio MX500/1 amp goes inside above the fuel tank.
Seadoo PRV 6.5" Rockford Fosgate Audio Upgrade Kit
This is our favorite and best selling audio package for Seadoo. 1 x MotoMarine's Seadoo Plug and Play Audio Harness 1 x Rockford Fosgate 800 Watt 4-Channel Amp 2 x PRV MT6MR600CF-NDY-2 Midrange 2 x PRV MT2.7TWB-4 Tweeter 2 x JL Audio Y-Adaptor This complete plug and play package for Seadoo, connects right up without the need to cut any wiring. Simply remove the factory speakers and factory amp. The JL MX280/4 Amp fits directly inside the speaker pod, and with our included speaker adapters, you can connect everything thru the factory wire harness. Installs in minutes. With our configuration, you will setup the AMP Bridged @ 4Ω 200 W RMS x 2
Yamaha Keyfob Remote Entry Tool
Yamaha Keyfob Remote Entry Tool is used to program Remote Security Transmitters/Keyfobs on Waverunners equipped with the Yamaha security/immobilizer system.
JL Audio® Marine Lighting Controller (MLC-RW)
The marine lighting controller is an advanced controller designed for managing RGB LED lighting circuits. Outfitted with PWM technology and high-capacity circuitry, the marine lighting controller produces up to 30 amps (400 W) of continuous output to power modern, multi-LED networks. All LED functions are easily controlled with the included rotary encoder or using your handheld device via built-in Wi-Fi® connection. Remember you need to purchase JL Audio® White Multifunction Cable
JL Audio® White Multifunction Cable
Our multifunction cable conveniently includes two 16 AWG speaker wires and four 20 AWG power wires for LED speakers in one cable. Ideal for use with speakers and subwoofers featuring LED illumination.
RIVA Yamaha/Kawasaki Valve Spring Compression Tool
Our overhead Valve Spring Compression Tool allows easy removal of valve springs and keepers without removing cylinder head. Includes compression adapter to pressurize cylinder keeping valves in place during removal of stock springs and keepers. Fits both Yamaha 1.8L & Kawasaki 1.5L 4-stroke engines. Key Features:
- Keeps valves in place during removal of stock springs and keepers
- Allows easy removal without removing cylinder head
- Includes compression adapter
- Fits both Yamaha 1.8L & Kawasaki 1.5L 4-stroke engines.
Rockford Fosgate Color Optix™ Extension Cable for PMX-RGB (Gen-2)
Plug-and-play cable that makes installation of the PMX-RGB controller with Color Optix™ speakers simple. This cable extends distance between the RGB controller and LED speaker. Check compatibility chart of Rockford Fosgate marine audio speakers before purchasing.
Mini Selector Battery Switch
Switch between 2 battery banks, switches isolated battery banks to all loads or combines battery banks to all loads
- Make before break contact design allows switching between battery banks without power interruption
Seadoo 10.25 inch Screen Retrofit Kit
Seadoo ECU Reflash
Seadoo ECU Reflash. This can be a mail-in service or in person at our Shop.
Seadoo Front/Rear Facing Air Intake
EGIS Circuit Breaker Surface Mount
Yamaha ECU Reflash
Yamaha ECU Reflash. This can be a mail-in service or in person at our Shop.
BRP BUDS3 V800 NO LICENSE
BRP DB9 to 6-pin Adaptor
Diagnostic Cable needed to connect your VCI800, MPI3, MPI2 device to your BRP Machine V800 Diagnostic Cable MPI2 Diagnostic Cable MPI3 Diagnostic Cable
Seadoo LCD
GTI 130 SE/Rental 2008-2014 And GTI 155 SE/Limited 2012-2014 Personal Watercraft Dashboard Panel
Seadoo LCD IS
Replacement for Sea Doo LTD is 260 2010-2012 for Sea Doo RXT 260 RS 2011 Sea Doo GTX 215 2011‑2012
